Welcome American ECIG Supply Customers!

American ECIG Supply and Wholesale Vaping Supply are pleased to announce that our companies have merged! Our combined team is excited to offer best in class service, selection and pricing to our valued customers. To ease the transition your account will stay the same, you will just need to reset your password when prompted. Your dedicated staff can still be reached at 1-866-916-ECIG (3244).

Thank you for your business!

Welcome to Wholesale Vaping Supply!

iPV V3, Black

Fulfilled By: Wholesale Vaping Supply
Please log into your account to see pricing and place an order. If you don't have an account yet, please register here.

> Variable Wattage | 7W to 150W in 0.1W Increments

> Fires any Coil from 0.2Ω to 3.0Ω

> Takes Swappable Dual 18650 Batteries







iPV V3, Black

The iPV V3 is a powerhouse of a box mod. This variable wattage mod will allow you to fine-tune your vaping experience by adjusting your power from 7W to 150W in increments of 0.1W! Above 80W the device adjusts in 1W increments, and allows for up to 5 preset programmable wattages. Able to fire coils at 0.1Ω up to 3.0Ω, this mod is powered by dual IMR 18650 batteries and is capable of producing up to 150 watts of power! The batteries are removable for separate charging and swapping with fresh batteries. The OLED screen is very easy to read, and will tell you your wattage, resistance, output voltage and battery life at a glance, without having to fumble through menus. In addition to the tactile firing button on the side, the device features two buttons for wattage adjustments. The iPV V3 has 510 threading with a spring-loaded connection, but will accept any 510 to eGo adapter if you'd like to use eGo-threaded atomizers. This mod is made of high-quality anodized aluminum, and provides more than enough power for beginners and veterans alike!

Note: The included Micro-USB cable does not charge the device. The cable is strictly for firmware updates. This device does not have onboard charging like the iPV V2 or V2.1 due to its dual-battery configuration.

Caution: We recommend only using batteries with a Continuous Discharge Rate of 20A or higher!

Specifications and Features:

Output Power: 7W - 150W

Output Voltage: 1V - 7V

Input Current: 1.3A - 30A

Input Voltage: 6.2V - 8.5V

Efficiency: 93%

Loading Resistance: 0.1Ω - 3.0Ω

Screen Size: 0.96" OLED

Low Voltage Protection

Low Resistance Protection

High Input Voltage Warning

Output Short Circuit Protection

Reverse Battery Protection

Quick Instructions:

Power On/Off: Click the firing button 5 times.

Adjust Wattage: Click or hold the + or - button to increase or decrease wattage, respectively.

Lock/Unlock: Click and hold both the + and - buttons simultaneously. The screen will indicate that this has been done correctly.

Programming Wattage Memory: Press and hold the + button until memory settings are indicated by displaying M1, M2, M3, etc. To change the set wattage for the current memory setting, press the - button then adjust up or down to the desired wattage. Pressing the fire button will lock that wattage to the current memory setting.



Write Your Own Review

Only registered users can write reviews. Please, log in or register



Use spaces to separate tags. Use single quotes (') for phrases.