The Joyetech eGrip is the perfect starter kit and stealth vape. Not only is this device small and compact; it's also deceptively unique and simple. Every component needed in an e-cigarette is located within the eGrip itself. Battery, tank, atomizer...they are all housed within the mod! This new version of the eGrip features an OLED screen that is much like the iStick. Output wattage, output voltage, atomizer resistance, and battery life are all clearly displayed on the screen. The eGrip is variable voltage as well as variable wattage, and is adjusted via the dial around the fire switch. The internal 1500mAh battery will last most vapers all day without having to recharge. Whether you're looking for a simple starter kit, or something subtle to bring out for the day, the Joyetech eGrip is all you need!
Power On/Off: Press the button 5 times in quick succession. The light will flash to indicate that this has been done correctly.
Switch Between Variable Wattage and Variable Voltage Modes: Press the button 3 times. Voltage can be adjusted between 2.0V and 8.0V. Wattage can be adjusted between 5W and 20W.
Adjust Voltage or Wattage: Rotate the ring around the button clockwise to increase power, and counter-clockwise to decrease power. Rotating the dial quickly will activate the auto-scroll function. Turn the ring in the opposite direction to stop auto-scrolling.
Adjust Airflow: Identify the small screw on the side of the device, towards the bottom. Use the included tool to turn the screw. Turning it clockwise will reduce the airflow and result in a tighter draw. Turning the screw counter-clockwise will increase airflow and result in a looser draw.
Replace the Coil Head: Unscrew the large screw located on the bottom of the device and remove it. Unscrew the atomizer head, and replace it with a new one. This should be done whenever flavor or vapor production is reduced to unacceptable levels.
Filling: Push up the lid on the side of the eGrip. Insert your bottle into the large hole, and fill it slowly. Remember to close the lid after filling the device to avoid leakage.
Dimensions: 46.4mm x 20.4mm x 99.5mm (Including Mouthpiece)
Battery Capacity: 1500mAh
Output Mode: Variable Voltage/Variable Wattage
Liquid Capacity: 3.6mL
- 10-Second Safety Cutoff
- Short-Circuit Protection
- Low Voltage Protection
- Low Resistance Protection (Below 0.4Ω)
- Temperature Protection
- 1 x eGrip OLED
- 1 x eGrip Mouthpiece
- 2 x eGrip CS Atomizer Head - 1.5Ω
- 1 x eGrip Atomizer Base
- 1 x USB Charging Cable
- 1 x AC Wall Adapter
- 1 x Manual and Warranty Card