The iTaste 134 is a unique-looking and easy-to-use variable wattage device. With 510 threading, eGo threading, and a removable beauty ring, this mod will accommodate virtually any clearomizer, cartomizer or tank and look good doing it. The 134 has a rotating wheel to adjust wattage among 6.5, 7.0, 8.0, 9.0, 10.0, 11.0, 12.0 and 12.5 watts. The firing button changes colors to indicate battery life; green indicates battery voltage above 3.7 volts, yellow indicates voltage between 3.6 and 3.7 volts, and red indicates voltage below 3.6 volts. The 134 accepts button-top and flat-top IMR 18650 batteries. No confusing menus. No cryptic input codes to remember. This is a simple, yet robust and powerful mod that is sure to turn some heads!
The itaste 134 comes with an iClear 30, 2.1 ohm top-coil clearomizer which has an amazing attention to detail. 16 wicks ensure that each of the dual-coils get enough liquid and never dry out and taste bad. The mouthpiece screws on for stability and swivels for comfort. The shape of the mouthpiece reduces e-liquid backup and leaking. The clear tube sits inside the top and bottom caps to keep liquid from seeping out through the seams. Holds 3.0mL of e-liquid and produces a ton of vapor!
- Power On/Off: Press the firing button quickly 3 times.
- Adjust Wattage: Rotate the wheel to desired power level.
There is a 90 Day warranty for device failures under normal use.
Click here to see if you you have the correct atomizer or cartomizer for your device.